CISCO認證資深網絡工程師(CCNP R&S)培訓
培訓班型： 周末班/脫產班
課程長度： 14天/84小時;15天/90小時
培訓日期： 待定
培訓價格： 技術培訓3000元/人
認證考試： 認證考試6900元/人,7600元/人(含票)
認證培訓9500元/人,10000元/人(含票)
培訓地點： 博學國際教育培訓中心
環境要求： 投影儀、白板、電腦
培訓形式： 課堂講授與實踐操作
培訓資料： 思科培訓教材
課程內容
認證描述: CCNP認證表示資深網絡工程師具有對從100個節點到超過500個節點的融合局域網和廣域網進行安裝、配置和故障排除的能力。獲得CCNP認證資格的資深網絡工程師擁有豐富的知識和技能，能夠管理構成網絡核心的路由器和交換機，以及將語音、無線和安全集成到網絡中的邊緣應用。
實施Cisco IP 路由(ROUTE 300-101)是獲得思科CCNP和CCDP認證需要通過的一項考試。考試時間為120分鐘，包括50-60道考題。ROUTE 300-101考試證明通過的考生具備網絡路由的知識和相關技能。他們有能力使用先進的IP尋址技術和路由技術實施可擴展的、高安全性的思科路由與局域網，廣域網及IPv6的連接。
實施Cisco IP交換網絡(SWITCH 300-115) 獲得思科CCNP和CCDP認證需要通過的一項考試。考試時間為120分鐘，包括45-55道考題。SWITCH 300-115考試證明通過的考生具備網絡交換的知識和技能。他們有能力使用思科企業架構來設計、配置和驗證企業網絡交換解決方案的實施。SWITCH考試還涵蓋了高度安全集成的VLAN和WLANs技術
認證先決條件：有效的CCNA或CCIE認證，CCNP證書有效期3年。
課程概述: 思科認證資深網絡工程師（CCNP）路由和交換認證幫助甄別網絡工程師對本地局域網及廣域網的設計，實施，驗證，故障排除及與其他網絡專家合作關于先進的網絡安全、語音、無線及視頻解決方案時必備的能力。對于那些至少有一年網絡工作經驗，并準備提升復雜網絡解決方案相關技能和獨立工作能力的人來說，CCNP路由和交換認證十分合適。獲得CCNP路由和交換認證的考生，證明了他們具備網絡工程師，網絡支持工程師，系統工程師或網絡技術員等企業職位所需的技能。此認證中的路由和交換協議知識將為您提供一個持久的適應于當今物理網絡和未來虛擬化網絡的知識基礎。
授課對象：渠道合作伙伴、經銷商、客戶、員工
入學要求： 熟悉如何使用微軟Window的各種應用程序；了解如何使用Internet和
Intranet，建議擁有在一個網絡化環境內工作的經驗；有CCNA網絡基礎更優
培訓內容:
實施Cisco IP 路由(300-101)
1.0 Network Principles （10% ）
1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table
1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing
1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL
1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization
1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency
1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration
2.0 Layer 2 Technologies（10% ）
2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)
2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.2.c Multipoint
3.0 Layer 3 Technologies（40%）
3.1 Identify, configure, and verify IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Identify IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Configure and verify static routing
3.4 Configure and verify default routing
3.5 Evaluate routing protocol types
3.5.a Distance vector
3.5.b Link state
3.5.c Path vector
3.6 Describe administrative distance
3.7 Troubleshoot passive interfaces
3.8 Configure and verify VRF lite
3.9 Configure and verify filtering with any protocol
3.10 Configure and verify redistribution between any routing protocols or routing sources
3.11 Configure and verify manual and autosummarization with any routing protocol
3.12 Configure and verify policy-based routing
3.13 Identify suboptimal routing
3.14 Explain ROUTE maps
3.15 Configure and verify loop prevention mechanisms
3.15.a Route tagging and filtering
3.15.b Split-horizon
3.15.c Route poisoning
3.16 Configure and verify RIPv2
3.17 Describe RIPng
3.18 Describe EIGRP packet types
3.19 Configure and verify EIGRP neighbor relationship and authentication
3.20 Configure and verify EIGRP stubs
3.21Configure and verify EIGRP load balancing
3.21.a Equal cost
3.21.b Unequal cost
3.22 Describe and optimize EIGRP metrics
3.23 Configure and verify EIGRP for IPv6
3.24 Describe OSPF packet types
3.25 Configure and verify OSPF neighbor relationship and authentication
3.26 Configure and verify network types, area types, and router types
3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.26.c Internal router, backbone router, ABR, ASBR
3.26.d Virtual link
3.27 Configure and verify OSPF path preference
3.28 Configure and verify OSPF operations
3.29 Configure and verify OSPF for IPv6
3.30 Describe, configure, and verify BGP peer relationships and authentication
3.30.a Peer group
3.30.b Active, passive
3.30.c States and timers
3.31 Configure and verify eBGP (IPv4 and IPv6 address families)
3.31.a eBGP
3.31.b 4-byte AS number
3.31.c Private AS
3.32 Explain BGP attributes and best-path selection
4.0 VPN Technologies（10%）
4.1 Configure and verify GRE
4.2 Describe DMVPN (single hub)
4.3 Describe Easy Virtual Networking (EVN)
5.0 Infrastructure Security（10%）
5.1 Describe IOS AAA using local database
5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
5.2.a AAA with TACACS+ and RADIUS
5.2.b Local privilege authorization fallback
5.3 Configure and verify device access control
5.3.a Lines (VTY, AUX, console)
5.3.b Management plane protection
5.3.c Password encryption
5.4 Configure and verify router security features
5.4.a IPv4 access control lists (standard, extended, time-based)
5.4.b IPv6 traffic filter
5.4.c Unicast reverse path forwarding
6.0 Infrastructure Services（10%）
6.1 Configure and verify device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Configure and verify SNMP
6.2.a v2
6.2.b v3
6.3 Configure and verify logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Configure and verify Network Time Protocol (NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Configure and verify IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Configure and verify IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Describe IPv6 NAT
6.7.a NAT64
6.7.b NPTv6
6.8 Describe SLA architecture
6.9 Configure and verify IP SLA
6.9.a ICMP
6.10 Configure and verify tracking objects
6.10.a Tracking objects
6.10.b Tracking different entities (for example, interfaces, IPSLA results)
6.11 Configure and verify Cisco NetFlow
6.11.a NetFlow v5, v9
6.11.b Local retrieval
6.11.c Export (configuration only)
實施Cisco IP 交換網絡(300-115)
1.0 Layer 2 Technologies （65%）
1.1 Configure and verify switch administration
1.1.a SDM templates
1.1.b Managing MAC address table
1.1.c Troubleshoot Err-disable recovery
1.2 Configure and verify Layer 2 protocols
1.2.a CDP, LLDP
1.2.b UDLD
1.3 Configure and verify VLANs
1.3.a Access ports
1.3.b VLAN database
1.3.c Normal, extended VLAN, voice VLAN
1.4 Configure and verify trunking
1.4.a VTPv1, VTPv2, VTPv3, VTP pruning
1.4.b dot1Q
1.4.c Native VLAN
1.4.d Manual pruning
1.5 Configure and verify EtherChannels
1.5.a LACP, PAgP, manual
1.5.b Layer 2, Layer 3
1.5.c Load balancing
1.5.d EtherChannel misconfiguration guard
1.6 Configure and verify spanning tree
1.6.a PVST+, RPVST+, MST
1.6.b Switch priority, port priority, path cost, STP timers
1.6.c PortFast, BPDUguard, BPDUfilter
1.6.d Loopguard and Rootguard
1.7 Configure and verify other LAN switching technologies
1.7.a SPAN, RSPAN
1.8 Describe chassis virtualization and aggregation technologies
1.8.a Stackwise
2.0 Infrastructure Security（20%）
2.1Configure and verify switch security features
2.1.a DHCP snooping
2.1.b IP Source Guard
2.1.c Dynamic ARP inspection
2.1.d Port security
2.1.e Private VLAN
2.1.f Storm control
2.2 Describe device security using Cisco IOS AAA with TACACS+ and RADIUS
2.2.a AAA with TACACS+ and RADIUS
2.2.b Local privilege authorization fallback
3.0 nfrastructure Services（15%）
3.1 Configure and verify first-hop redundancy protocols
3.1.a HSRP
3.1.b VRRP
3.1.c GLBP
TSHOOT（300-135）
1.1 Complex network maintenance planning
1.2 Select maintenance and troubleshooting tools and Applications
1.3 Planning troubleshooting process for complex enterprise networks
1.4 Maintenance and troubleshooting campus exchange based issues
1.5 Maintenance and troubleshooting solutions based on Routing
1.6 Maintain and troubleshoot network security solutions
1.7 Integration of maintenance and troubleshooting, complex enterprise networks
1.8 Troubleshooting for exchange performance problems
1.9 Wireless connection troubleshooting
2.0 Voice ip
2.1 Video solution
2.2 Multicast solution
2.3 Troubleshooting NAT and PAT
2.4 Troubleshooting DHCP
2.5 Mobile IPv6, OSPFv3, RIPn
